The quick connect is designed to have propane come out and is fed from the main propane tanks on your 2014 Keystone Sprinter. Check for a small lever on the side of the connection that needs to be flipped down so it is in-line to allow the propane to flow.
If you already did this, it could be that you hooked up an appliance that has its own regulator. The propane is already flowing through the regulator on your 5th wheel, so if it is double regulated you won't have enough pressure to... view full answer...
The number that you referenced is a date code and not a part number therefore cannot be used to determine compatibility. The "1739" simply means the valve was made on the 39th week of 2017. In order to determine compatibility of the MB Sturgis Quick Disconnect Kit for Low Pressure Appliances part # 104052-401132 you just need to be sure that what you are connecting it to uses 1/4" NPT fittings. The model 250 quick disconnect ports are pretty much standard for propane accessories so all... view full answer...
I have a solution for this problem. As you have explained, sometimes trailer frame mounted accessories can interfere with the installation of weight distribution and/or sway control. The good news is there is a product that allows you to hang the spring bars without interfering with those accessories. Take a look at the Chain Hangers for Reese Weight Distribution Systems - Bolt On, # RP58305.
You will be able to mount these hangers in the appropriate position to correctly install the... view full answer...
Go To Results